Help with upgrading my Pulse XE’s OEM Rambo board to a Fysetc Spide
kenchalk last edited by
I’m upgrading my Pulse XE’s OEM Rambo board to a Fysetc Spide
Other than flashing the board with the new [Marlin firmware](( https://github.com/RSteel517/Marlin-1_1_9-PulseXE- )) what else should I consider.
As background, a power surge more or destroyed the OEM board. My home owners Insurance replaced so I have nothing to loose if this goes south.
Sorry to hear about your printer, these things do happen. Are you sure that the firmware is even compatible with the Fysetc? Seems to me that you are going to need some extensive tweaking of the Marlin compile to make this work. I upgraded my personal printer to Duet which gave me infinite control over the printer without Marlin, but it came at a cost of learning gcode and a more complicated way of production compared to what the MatterHacker team has prepared.
Definitely don't use that firmware.
I'd recommend modifying the current branch of Pulse firmware for the Spider board.