Pulse XE - viki lcd light flashing purple?
OgD2P last edited by
I have a removable garolite bed and I didn't seat it properly, so when I tried to print it bumped against the frame and the system threw a reset error. I turned the machine off then back on. After a long pause, the lighted ring around the control knob next to the viki lcd panel started flashing purple and nothing else happens. I cycled the power multiple times and even pressed the reset buttons, but always with the same result. Any ideas?
@ogd2p your microSD card is likely not seated properly in the electronics board so it isn't able to boot up. Check that and it should resolve the issue.