How to set extruder temperature

  • For a few years I have been using MC 1 and now am trying to use MC 2.

    I haven't found a way to set the extruder temperature. It keeps defaulting to 110 degrees.

    My workaround is:

    • Set the speed multiplier to 0.25
    • Start the print.
    • Then, from the LCD panel of my Rostock Max V3, I adjust the temperature to 235 degrees.
    • Set the speed multiplier to 1.0

    Can someone tell me how to get the printer to automatically print at 235?


  • Under slice settings there's a Filament tab. In the first block there's a line for Extruder Temperature. Set it there before slicing. But you're better off using a better slicer like Cura.

  • This post is deleted!

  • MatterHackers

    The temperatures for your prints can be controlled in the Slice Settings> Filament> Temperature.
    This can be adjusted for each filament profile you are using which should automatically switch to X temp.


Log in to reply

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.