Help on project box
joebruceC last edited by
I created a project box and have printed it before. I increased the height to 75mm but it added a top cover when it was totally open. It does not show up in the slice image. Its a simple 4 sided open project box with square corners and 10mmx10mm corners with holes for inserts. The bottom has standoffs. Everything printed fine up to the top 5mm where it started printing a top layer. What can I try on my settings?
mpirringer last edited by
@joebrucec Set top layers to 0
It's possible you have some bad mesh. Also, it definitely should show up in the slice image. If you've confirmed your settings and it's not showing up on the slice preview, please email us - email@example.com - and attach the STL.