Printer Heat Failure followed by Probe Failure
-
Saturday printed great, same material, same bed. made 7-8 printes, 3 different objects
PETG on a Garolite bed
Had to open support ticket this amBoth log excerpts here, but I dont see anything that can help me now
Heat Failure print log:
Communication State: PreparingToPrint
N1141 M105*18ok T:33.66 /0.00 B:35.00 /0.00 @:0 B@:0
N1 M110 N1*125ok
N2 M114*37X:5.00 Y:215.00 Z:215.00 E:8193.90 Count X:400 Y:17200 Z:86000
ok
N3 M119*41Communication State: Printing
Reporting endstop status
x_min: open
y_min: open
z_min: open
z_max: TRIGGERED
e=-7403
pos_0: SENSOR:-0.01 STEPPER:-17.84
filament: TRIGGERED
ok
N4 M117 Printing - 0%*9Reporting endstop status
x_min: open
y_min: open
z_min: open
z_max: open
e=0
pos_0: SENSOR:-0.01 STEPPER:0.00
filament: TRIGGEREDPause Due to Error
Error:Heating failed, system stopped! Heater_ID: 0
N1072 M105*19Error:Printer halted. kill() called!
HW error- Probe log:
Communication State: PreparingToPrintMatterSlice version 2.21.10
Optimized model: 0.0s
Sliced model: 0.1s
Generated layer parts: 0.0s
Fixing touching surfacesTouching surfaces fixed: 0.0s
Removing extruder intersectionsExtruder intersections removed: 0.0s
Generating supports
N44960 M105*40ok T:201.07 /0.00 B:53.08 /0.00 @:0 B@:0
Generated supports: 0.2s
Generated Outlines: 0.3s
N44961 M105*41ok T:199.57 /0.00 B:52.98 /0.00 @:0 B@:0
N44962 M105*42ok T:198.32 /0.00 B:52.92 /0.00 @:0 B@:0
N44963 M105*43ok T:197.17 /0.00 B:52.78 /0.00 @:0 B@:0
Wrote layers: 0.00s
Total time elapsed 4.08s
Print time: 6518
Filament: 8196
Filament2: 0
N44964 M105*44ok T:196.12 /0.00 B:52.65 /0.00 @:0 B@:0
N1 M110 N1*125ok
N2 M114*37X:5.00 Y:215.00 Z:214.63 E:2871.81 Count X:400 Y:17200 Z:85852
ok
N3 M119*41Communication State: Printing
Reporting endstop status
x_min: open
y_min: open
z_min: open
z_max: open
e=12155
pos_0: SENSOR:-0.01 STEPPER:29.29
filament: TRIGGEREDecho:busy: processing
echo:busy: processing
Pause Due to Error
Error:Probing Failed
X:25.00 Y:22.00 Z:7.00 E:2871.81 Count X:2000 Y:1760 Z:2800Communication State: Paused
N271 G1 X25.1 F5400*43
-
@mavin Disregard
Turns out the Hotend was dislodged, pushed up out of the bracket slightly and that caused all the errors