Printer Heat Failure followed by Probe Failure



  • Saturday printed great, same material, same bed. made 7-8 printes, 3 different objects
    PETG on a Garolite bed
    Had to open support ticket this am 😞

    Both log excerpts here, but I dont see anything that can help me now

    Heat Failure print log:
    Communication State: PreparingToPrint
    N1141 M105*18

    ok T:33.66 /0.00 B:35.00 /0.00 @:0 B@:0
    N1 M110 N1*125

    ok
    N2 M114*37

    X:5.00 Y:215.00 Z:215.00 E:8193.90 Count X:400 Y:17200 Z:86000
    ok
    N3 M119*41

    Communication State: Printing
    Reporting endstop status
    x_min: open
    y_min: open
    z_min: open
    z_max: TRIGGERED
    e=-7403
    pos_0: SENSOR:-0.01 STEPPER:-17.84
    filament: TRIGGERED
    ok
    N4 M117 Printing - 0%*9

    Reporting endstop status
    x_min: open
    y_min: open
    z_min: open
    z_max: open
    e=0
    pos_0: SENSOR:-0.01 STEPPER:0.00
    filament: TRIGGERED

    Pause Due to Error
    Error:Heating failed, system stopped! Heater_ID: 0
    N1072 M105*19

    Error:Printer halted. kill() called!

    HW error- Probe log:
    Communication State: PreparingToPrint

    MatterSlice version 2.21.10

    Optimized model: 0.0s
    Sliced model: 0.1s
    Generated layer parts: 0.0s
    Fixing touching surfacesTouching surfaces fixed: 0.0s
    Removing extruder intersectionsExtruder intersections removed: 0.0s
    Generating supports
    N44960 M105*40

    ok T:201.07 /0.00 B:53.08 /0.00 @:0 B@:0
    Generated supports: 0.2s
    Generated Outlines: 0.3s
    N44961 M105*41

    ok T:199.57 /0.00 B:52.98 /0.00 @:0 B@:0
    N44962 M105*42

    ok T:198.32 /0.00 B:52.92 /0.00 @:0 B@:0
    N44963 M105*43

    ok T:197.17 /0.00 B:52.78 /0.00 @:0 B@:0
    Wrote layers: 0.00s
    Total time elapsed 4.08s
    Print time: 6518
    Filament: 8196
    Filament2: 0
    N44964 M105*44

    ok T:196.12 /0.00 B:52.65 /0.00 @:0 B@:0
    N1 M110 N1*125

    ok
    N2 M114*37

    X:5.00 Y:215.00 Z:214.63 E:2871.81 Count X:400 Y:17200 Z:85852
    ok
    N3 M119*41

    Communication State: Printing
    Reporting endstop status
    x_min: open
    y_min: open
    z_min: open
    z_max: open
    e=12155
    pos_0: SENSOR:-0.01 STEPPER:29.29
    filament: TRIGGERED

    echo:busy: processing
    echo:busy: processing
    Pause Due to Error
    Error:Probing Failed
    X:25.00 Y:22.00 Z:7.00 E:2871.81 Count X:2000 Y:1760 Z:2800

    Communication State: Paused
    N271 G1 X25.1 F5400*43



  • @mavin Disregard

    Turns out the Hotend was dislodged, pushed up out of the bracket slightly and that caused all the errors


Log in to reply
 

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.