Small intricate part in ABS warp
-
I have a pulse Xe and I’m using MH build series white ABS. I already have an enclosure for the printer. What can I do to help these smaller parts not warp? The parts are about 100mm x 50mm.
-
@jacob5421 Your picture did not upload this forum is very limited in that you better post it somewhere else and then link it.
Now we print a lot in ABS but I gave up on MH ABS about 2 years ago I have been successful with Zyltech, hobby king, Esun. Now make sure the bed is at least at 100 ambient you want to get over 40 C and glue stick of hair spray or abs juice help on garolite if that is your build plate. Also make sure NO FAN!
-
@mpirringer thanks I will try the glue stick or hair spray
