Rack2020 test
-
Tested the rack2020 today everything worked great except the video which was blurry (updated video_
https://www.chiefdelphi.com/uploads/default/original/3X/c/2/c2576d0c951a5e2e5236205d016166554ed35662.MOV
You are looking at about 2kg of hips and 20 bearings printed in Nylon. The bearings were printed on a MH Pulse the Hips Gears and brackets on an Anycubic Chiron. All are printed with a .8 nozzle. Here is a link to the parts
https://grabcad.com/library/frc1989-rack-and-pinion-1-840-modulus-1
Here is a link to the rack on the build plate
https://www.chiefdelphi.com/uploads/default/original/3X/2/d/2d76c94080cbbb831dfc8a348a07b67f079b193f.jpeg
And here one of the bearing holder platesSo much for all the comments I heard that one cannot print accurately with a .8 or FDM is not up to the task to get center distances right.
-
Brilliant work, you have most certainly put the doubting Thomases in there place.
-
@georgecprice Thanks
