The changing of the nozzle
-
For us that are a middle level and just now wanting to try printing with a larger or smaller nozzle would you who are versed in this please give us an idea what variables will need to be adjusted.
As in, when going to a .8 from a .4 what will need to be adjusted up or down? Extrusion speed, Temp, etc etc.I know not all printers are the same but there has to be common variables that will need adjusted.
Thanks in advance
-
The only thing I had to change much was tmp, since you are pushing more plastic it needs to melt faster. On my Anet A8 I jumped to a high volume nozzle that has a longer neck and heater block that helped a lot. Just my two cents.