MatterControl 2.0 MacOS
-
@michael-petitclerc any updates on this? Is MC 2.0 for OS like something imminent or is it 12-18 months out? honestly 1.7.1 is a bit rough and fairly glitchy so I'm hoping that if 2.0 is a long ways out that there can be some interim patches on the 1.x branch before long.
-
@thinger - We had a working build of 2.0 a week ago and then it broke with the latest OS update from Apple and some changes in the development tools from Microsoft. We are working with the Xamarin (Microsoft) dev team and hope to have it resolved soon. We should be able to put up a build within a week or two.
Thanks for the interest and questions.
-
Here is a link to the current build. We should be pushing this up to the site in a few days.
-
Thanks for the beta, awesome!
-
Working great but,
Cooling is not starting. I disable cooling for the first layer but it will not start at 2+
Using the latest beta 10022
-
Is there some sort of trick to getting mc 2.0 to work with a mac? I have tried numerous attempts to get MC (all versions) to connect to my mac with no luck. Ive downloaded any and all drivers ever suggested to no avail. Im running macOS 10.12.6 now and cant get this to work with either my micromake D1 or my Anycubic i3 prussa clone. What gives?
-
Hey @8perf
You know, I do not have an answer for you on this one right now but I will reach out to Lars and see if I can get some information to get us started on what we can do.
For our reference, is there anything specific that happens? Any weird errors or pop-up's?
Thanks!
-
@michael-petitclerc Thanks Michael. No, no weird pop-ups or anything. During the use of the setup wizard, it jsut comes back and says "Oops, printer could not be detected." in red letters. If i try to configure manually, the only two ports I have to cose from are the bluetooth one and the one called "SLAB_USBtoUART." That last one is the driver I was told to install to get the i3 to work overUSB on my windows 10 laptop with Cura. It works just fine.
When I do try to connect after manually configuration, the printer will do its startup/ connection beep like it does in Windows/ Cura but then MC returns the connection error again in red letters.
-
Sounds like some sort of compatibility issue, do you mind dropping us an error report in GitHub here so our guys can look it over and see if there is something we can do about it. Thanks!
-
@michael-petitclerc Happy to. How do I generate one of those?
-
When you go to this link, you can click the "New Issue" button towards the top right of the screen and list the steps required to produce the issue along with the information requested.
Thanks!
-
@michael-petitclerc Done.