Pulse heated bed strain relief
I have modified this part entirely in MatterControl using only the stl file. Yes, I do have all the source files and can modify them in fusion, but it was just as fast to do this in MatterControl using add/subtract/intersect functions.
I had some problems with my bed thermostat plug recently. I don't think it is something to be concerned with. I just happen to run my printers 24/7 and I have accelerated wear. The original strain relief combines the wires from the bed heater at one point. But this puts stress on the molex connector for the thermocoupler. Rather than bending everything to the center, I redesigned the strain relief to keep the wires straight.
Model on the left is the original, on the right is the modified version.