Pro PLA printing issues

  • Hello, I've purchased 8 spools of PLA from Matterhackers so far, 2 of which are Pro versions. All of the standard PLA prints with out much issue and roughly the same print settings however both of my Pro PLA spools (black and bronz) have major print quality issues. Adjusting print temps and all the other necessary settings, I finally locked the black Pro pla in but it clogs the hotend every now and then. However the bronz pro pla seems to suffer from layer adhesion issues. I'm trying different temps, extrusion multipliers, and layer settings and though each time gives me a slightly different result, it's still pulls apart.

    Any hep is appreciated

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.