Change bed temperature after printing first layer
-
Is there a way in GCODE or MatterControl to change the bed temperature after printing X layers? After printing the first few layers of PLA I would like to turn the bed heater off.
-
MatterControl does not currently have this feature. The workaround would be to generate the .gcode file and manually add in a M190 S0 command wherever you like.
Alternatively, if your printer is connected to MatterControl during the print, you can use the CONTROLS pane to manually change the bed temperature to 0 whenever you like: http://wiki.mattercontrol.com/CONTROLS/Temperature#Bed_Temperature
