I get the worst results with this filament. It is BONE DRY (Sat in Print Dry at 45C for days on end), especially since I live in the desert. I have a Pulse XE E-422. I have tried the default settings for Nylon, and have tried other things like slowing down the speed to <25, heating up the bed to 55, lowering bed temps, adding additional retraction, lowering retraction. I just cannot seem to get a good pairing of settings with this stuff. I know it is a "soft" Nylon, but all my attempts here are crap.
Does anyone use this stuff on a Pulse XE or equivalent that could detail ALL the pertinent settings? Are the settings stored in a file I could get? I run Mattercontrol (MC) on a Mac. I dont know how to get photos to show, but my latest print has some stringing and tons of open spaces in between walls, especially around holes. The print in question is some combat robot parts, about 3" x 4" triangular. I printed a 5mm brim, and use 5 or 6 perimeters for strength. FWIW, I build the part profile in Fusion 360, then import it to MC as an stl.
Edit: Adhesion to the bed is just OK, but not great. I print on MatterHackers garolite bed that was lightly sanded and use PVA glue stick on there as well.