@mpirringer said in Printhead moves to wrong corner after print, grinds belt.: Try this - this is my end code on my pulse ; Retract and move away G91 G1 E-[retract_length] F1200 G90 G0 X5 Y210 F[travel_speed] G28 Z0 M104 S0 ; turn off temperature M140 S0 ; turn off heat bed M106 S0 ; turn off layer fan M84 ; disable motors I do not recommend copying a persons G-Code from their profile directly unless that person has the same printer. In this case, the user Soapbox1858 has a different unit than the pulse. User Brentwright has a pulse but we were aware of the issue, which at this point should be resolved.