Hi there, I had order the Black MH PETG and the Translucent Orange MH PETG.

The black prints nicely and haven't really any problems with it.

Its the Translucent Orange, each time I print something the quality is way below par. I am needing to find the best print settings for this on an Ender 3 printer with a Glass Bed.

I was wondering if anyone has a profile that works great for this orange material on an ender 3...

I've tried around 240 - 250 for nozzle temp (black works around 244)
but quality is almost random. I see tearing at times and then I see nice smooth bottom layers...

Bed temp is 80 - 90 cause of the glass... I will try to lower it but when I used the black, I got warping on one corner of my build.

normally fan is off on first layer and 100% afterwards, last print lowered it to 75% but the print ended after like 5 - 8 layers and returned to end position. but nozzle had a lot of material around the head.

I revert all speeds to 40mm. do you... since first layer print was 20mm.

Please help with any information possible. even if its meaningless.

Eric