@richmarbury ok,it appears that i may have just had an extremely bad roll of this PETG.The next roll of this filament printed as expected and its back to my goto filament
R
richmarbury
@richmarbury
0
Reputation
9
Posts
942
Profile views
0
Followers
0
Following
Posts made by richmarbury
-
RE: is there a new formulation for the Build Series Black PETGposted in General 3D Printing
-
RE: MC does not export gcode with the auto bed level feature checked.posted in MatterControl
make sure you do a re-calibration of your bed leveling .I am using the latest stable version and have not experience this trouble.
-
is there a new formulation for the Build Series Black PETGposted in General 3D Printing
I just started printing with probably my 7th roll of Build Series black PETG. I had to bump the extruder temp up 10 degrees to get even close to the quality of prints that
i had with previous rolls .I bought the 4 roll special ,I hope the other rolls behave more like my previous purchases. -
RE: Blob at end of printposted in Pulse 3D Printers
latest update did fix my blob trouble many thanks
-
RE: Blob at end of printposted in Pulse 3D Printers
I have this same problem when printing from the sd card only
-
RE: gobs of black plastic in my printsposted in Pulse 3D Printers
a slight tightening of the nozzle and i am back to making great prints
-
RE: gobs of black plastic in my printsposted in Pulse 3D Printers
@richmarbury after a little better examination the E3D holder/support is not melting removing the heater cover i also found globs of the filament i am now using.now suspect some type of leak.
-
gobs of black plastic in my printsposted in Pulse 3D Printers
suspect that my E3D holder is melting away on my pulse xe .is it possible to get the STL files for these parts,so i can print them before they melt completely away.