@hamprinter Thanks! That really helped. I was afraid with some of the bundles that I may have written Bl for blue and not read it as Bl but as black when I put things back together. You're pictures a a big help. Thanks for sharing that with me.
Posts made by NeutronKen
RE: New RamboMini motherboard
Hey Thanks. That's the same motherboard, so those help a lot. Those confirm what I had for the wiring of the motherboard. Looks like you may have the same thing happening to your wires coming from the mosfets like I did. My bed heater output got to my wires somehow and cause the terminal block to fail, which resulted in the mosfet not working. I just need to get the firmware installed on the board and I will be set to go. Unfortunately, there isn't any firmware on the git hub so I am slowly going through the Marlin 2.0.6 and trying to get it to compile and work. That's uber tedious. But I am making progress. I really appreciate your photos. They really helped a great deal.
New RamboMini motherboard
Hi there, folks, I just replaced my RamboMini motherboard that failed. I took pictures of the old board to make sure the wires are all oriented the correct way to wire in the new board. I want to verify to make sure I didn't make a mistake.
I have gone through the schematics and the connection diagram available on the RamboMini github and think everything is okay and wired correctly. I also annotated on my connection diagram how my wires were connected on my board. Having pictures of someone else's board showing the connections to the board would help making sure I didn't write something down incorrectly or worse yet wired wrong. Could you that have a D-132 Pulse printer share your pictures of how your board is wired, please? We can exchange pictures. Thanks for your help.