Also just realized that only the second extruder is working as normal, as if the first one was turned off entirely besides the temperature.
Posts made by jnleetheboss
Temperature Issue with Dual Extruders
Something strange is happening when I try to print with two extruders: one heats up as normal, but the other one falls then starts heating as normal. Basically, they're heating separately. I can't tell which part of the firmware controls that, if it is a firmware issues. Some help would be much appreciated.
RE: Unable to use the lcd controller on printer
I bought a replacement driver board along with the screen, as well as having re-flashed the firmware many times. It's probably the rambo or the programming, but I have no idea where things could have gone wrong as the rest of the functions work as expected.
Struggling with e3d Chimera
I have been trying to attach an e3d chimera onto my printer for dual extrusion, yet have been unable to configure it. When I attempt to heat an extruder, both heat up at the same time, even when only one is heated at a time. Also, the ezstruder that I am going to use for the second nozzle does not operate, and any attempt to use it activates the first one instead. It would be much appreciated if I could get some pointers, as I am new to this whole dual extrusion.
Unable to use the lcd controller on printer
From a few months back, I have been unable to use the lcd on my rostock max v2. When I turn the printer on, the lcd immediately goes to the menu, where I am unable to click any of the options. I have already confirmed that the issue is not in the lcd as I used a replacement and the issue persists. I have no idea what's happening as the printer works through the usb, but not the SD or the controller.