MatterControl sends G-Code over a serial connection, so if the Trinus3D can support that protocol, it is compatible with MatterControl at the basic level. I noticed from a quick search about the printer that it also transforms into a laser engraver; this functionality is not inherent to MatterControl. Only the 3D printing side would likely work, though with some experimentation, you might be able to use the laser.In any case, we don't have one, so we won't likely produce a profile for MatterControl in the short term future, but you can probably figure something out. Check out these links for more info:http://www.mattercontrol.com/#jumpMatterControlDownloadshttp://wiki.mattercontrol.com/Getting_Started#Connecting_to_a_Printerhttp://wiki.mattercontrol.com/Custom_Printer_Profiles#Edit_printer_settings