I had to slightly modify one of the spacer nuts on the back left of the bed. I removed it, and filed it down with three passes on both ends with a metal file. reinstalled it, and now the first layer is printing perfect.
Posts made by barnes.jonathan
RE: Cura profile?
I got it to work in Cura 3.4.1
the parts I was missing was adjusting the stainless set screw at the top right of the printer to move the print head down (z axis) until it was the correct offset from the print bed.
second part I was missing, was I had an undefined temperature in my Gcode. M104 S[temperature]
my G code ignorance didn't realize I needed to put the temperature after M104 S
so I am using M104 S214
its working great.
my next goal is to adjust that stainless hex bolt on my other three pulse printers with the hope of using one profile for the four printers (I am in an educational setting and having four different profiles, one for each printer, is not easy to manage.