i had 2 prints going on 2 printers with 2 versions of MC when there was a disconnect from pc,

on reconnect the dialog to recover print came up and i selected the recovery,

both machines warmed up and started to print but neither moved the print head o the correct level ?

both crashed into the model and melted it?

had to kill power as the head was destroying my mach trying to get to the start point

i am having the same problem,

MC starts with a white block and large red X?

i have uninstalled and tried older versions with no luck

i reinstalled windows and matter control and still only the matter slicer is working

i tried various items from thingy verse and my fusion 360 stl files which worked fine when slic3r wus working

i will try it thanks

it sounds like a bit of a work around though? is there a reason why it should not work from MC?

i got Matter slice and cura after reinstalling,

i had slic3r for a while but now i get error message with slic3r soon sfter hitting the print button

if i click print it does nothing,

if i do a layer view i get the error

slicing Error.

Please review your slice settings

could you look at maybe implementing a type of radial infill /fill for printing larger diameter items like a bezel as in picture?

where the infill will follow from the center of the item?

its frustrating that there is limited options for this type of printing when the first layer is important as a bezel print where all eyes are on it?

after your clue as to software leveling i had a look at what the settings were and found to my surprise

this.

still not sure how to correlate why the printer would lift z at start of print, but i manually set them to 0.1

and it does not lift now

After redoing the bed leveling in MC this is what i have,

Will go through the two Versions i used before and see if i can find something

yes, if i turn off the software print leveling it does stay at the correct height, yaay we on the right track