Cura profile?

  • I got it to work in Cura 3.4.1
    the parts I was missing was adjusting the stainless set screw at the top right of the printer to move the print head down (z axis) until it was the correct offset from the print bed.
    second part I was missing, was I had an undefined temperature in my Gcode. M104 S[temperature]
    my G code ignorance didn't realize I needed to put the temperature after M104 S
    so I am using M104 S214

    its working great.
    my next goal is to adjust that stainless hex bolt on my other three pulse printers with the hope of using one profile for the four printers (I am in an educational setting and having four different profiles, one for each printer, is not easy to manage.

  • I had to slightly modify one of the spacer nuts on the back left of the bed. I removed it, and filed it down with three passes on both ends with a metal file. reinstalled it, and now the first layer is printing perfect.

  • There is also a "z offset" setting in cura that will do just what it says.

    When I setup my pulse I use mattercontrol auto level to learn what the z offset is then I use that as a starting point in cura and then do some test prints and finetune the z offset value.

  • @dirtbikes987 Where did you see the z-offset from mattercontrol after bed leveling?

    Also has anyone got a gcode version of auto bed leveling working?

  • If anyone has a working Cura profile for the Pulse, could you post it somewhere? I'd love to use Cura as the slicer for this printer.

  • Sorry for the delayed response. Once you do an autolevel in mattercontrol, there is a screen you can go into where it will list out your z values ( I forget where it is). From that you can tell how out of level your bed is.

  • MatterHackers

    Hey @dirtbikes987

    I dropped you a message in the other forum post, take a look and let me know what you have.

  • I've been talking with MatterHackers support and they sent me some starting G-Code that you can use assuming you have a 'D' model Pulse. (I think the sticker is on the back of the gantry with the model number)

    I have not yet had a chance to test it yet, but this is what they sent:

    G28 ; home all axes
    M280 P0 S160 ; clear probe status
    M280 P0 S10 ; deploy probe
    G29 ; run firmware mesh leveling
    M280 P0 S90 ; retract probe
    G1 X15 Y10 Z0.8 F1800 ; move to front corner of bed
    G92 E0 ; reset extruder position
    G1 X100 Z0.3 E20 F900 ; purge hot end
    G92 E0 ; reset extruder position
    G1 E-2 F3600 ; retract filament

    You can change or delete anything after "M280 P0 S90" if you don't want to use the purge line.

  • hey - i tried to put my Pulse back into operation again a couple of months ago and ended up just printing things that could slice in matter control... so the printer went out of operation pretty quickly.

    i am going to use this forum to try to get it going with cura again!

    question: do we not have the ability to set the z off-set in the firmware?

  • @rsteel517 how do we manage z offset with this gcode?

Log in to reply

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.