Pulse EX on Cura

  • I seen a post way back but has anyone had much luck with a profile for Pulse on Cura, MatterControl is lacking so many great features, and would love to get it working on Cura.



  • Global Moderator

    @erievon It's a ying yang, they both have great features. Load Pursa mk3 profile on Cura. Then drop your gcode model onto MC to print.

  • Sure would be great to have a working Cura profile...

  • I have a working profile in that Cura, it's based on this profile: https://help.matterhackers.com/article/210-pulse-cura-configuration but I found that importing it as the guide suggests is a bit buggy. I did the following To set it up in cura:

    1. settings>Printer>add printer
    2. Add non-network printer>custom FFF Printer
    3. Copy these settings

    Start G-code:
    G21 ; set units to millimeters
    G90 ; use absolute positioning
    M82 ; absolute extrusion mode
    M104 S{material_print_temperature_layer_0} ; set extruder temp
    M140 S{material_bed_temperature_layer_0} ; set bed temp
    G29 ; mesh bed leveling
    M190 S{material_bed_temperature_layer_0} ; wait for bed temp
    M109 S{material_print_temperature_layer_0} ; wait for extruder temp

    G92 E0
    G1 X5 Y5 Z10 F1800
    G1 E20 F100
    G1 X100 Z0.3 E45 F900
    G92 E0
    G1 E-2 F2400

    End G-code
    G92 E0
    M104 S0 ; turn off extruder
    M140 S0 ; turn off heatbed
    M107 ; turn off fan
    G1 X0 Y210; home X axis and push Y forward
    G28 Z0
    M84 ; disable motors

Log in to reply

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.