Wire of z-axis proximity sensor for Pulse XE nylon
LukeKong last edited by
I found out the pulse xe is having problems with z-axis homing. Then I noticed that one brown wire is sticking out unattached. It is probably the output signal wire of the z-axis proximity sensor. However, Z-max and Z-min terminals on the circuit board were occupied. The blue and black wires of the proximity sensor were connected properly, but not the brown wire. Does anyone know how to solve this?
tinken Global Moderator last edited by
@lukekong what does that wire go to?
pverdin last edited by pverdin
This might help, Pulse XE Printer:
Brown appears to be Z-Max power which would explain your Z-Axis issues. However you said your Z-Max was filled so this may not help.