Pre print idea



  • Been around the block with slicers over the years and just picked up a Pulse and giving MC a go and I'm really liking both! Something that I would set manually in the past and thought it would be cool to see as a default for any preset chosen... When you press print, it would heat up the bed and nozzle together as usual but the nozzle would be about 30% below its target temp. Once temps are reached the printer would do its mesh leveling then raise the Z, home, raise the nozzle temp to the target temp then extrude a line as usual, then print.

    I think this would benefit users when choosing different filaments and having the nozzle not ooze across the bed when auto leveling or creating a big lump of filament when trying to clear the nozzle before a print. I know you can retract after a print is completed but this still helps me with less interaction during leveling.

    Just thoughts...


Log in to reply
 

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.