Change bed temperature after printing first layer
MarkLonsbury last edited by
Is there a way in GCODE or MatterControl to change the bed temperature after printing X layers? After printing the first few layers of PLA I would like to turn the bed heater off.
ryan.lutz last edited by
MatterControl does not currently have this feature. The workaround would be to generate the .gcode file and manually add in a M190 S0 command wherever you like.
Alternatively, if your printer is connected to MatterControl during the print, you can use the CONTROLS pane to manually change the bed temperature to 0 whenever you like: http://wiki.mattercontrol.com/CONTROLS/Temperature#Bed_Temperature