How to set extruder temperature
hcdebey last edited by
For a few years I have been using MC 1 and now am trying to use MC 2.
I haven't found a way to set the extruder temperature. It keeps defaulting to 110 degrees.
My workaround is:
- Set the speed multiplier to 0.25
- Start the print.
- Then, from the LCD panel of my Rostock Max V3, I adjust the temperature to 235 degrees.
- Set the speed multiplier to 1.0
Can someone tell me how to get the printer to automatically print at 235?
Jacob.E last edited by
Under slice settings there's a Filament tab. In the first block there's a line for Extruder Temperature. Set it there before slicing. But you're better off using a better slicer like Cura.
mpirringer last edited by
This post is deleted!
ErikEscudero MatterHackers last edited by
The temperatures for your prints can be controlled in the Slice Settings> Filament> Temperature.
This can be adjusted for each filament profile you are using which should automatically switch to X temp.