SD Card Print Problem -Pulse: goes to max z axis and motor runs on
When I perform an SD Card Print, at the end of print the extruder, runs to the top and "Runs" on will not stop. I have to turn off printer to stop.
All Prints are normal when printing from PC/Matter control 2.0 to Printer.
Hi there @Bretwright
Thanks for posting up in our community, I will see if we can help you out with this one. The first thing to ask would be what is your pulse version? It should be on the back of the frame at the top. From there, do you have that same version selected in MatterControl?
If those look good, please upload me a G-Code so I can take a look at it and let you know what I see.
@michael-petitclerc Excellent, I will do that tomorrow. I was thinking about looking at the Gcode myself...another thing to learn.
@michael-petitclerc Pulse Model C-132 SN 101-0000038-7497003. Yes - C-132.
Also note - Historically - This was not a problem, I did have to change out the BLTouch, after my OEM BL broke during a print. Finally got that intalled and calibrated. Just recently started a new user, he designed a print in MC(latest version) transferred it to the SD Card, and his print(Called Doomahicky) did not go "Max Z", stopped as expected. I will include the " Calibration-Box.gcode.[0_1553187411355_Calibration - Box.gcode](Uploading 100%) [0_1553187453973_Doomahicky.gcode](Uploading 100%)
Looks like the system here did not upload correctly, maybe drop us an email at firstname.lastname@example.org and we can assist with it there.