printing with PETG filament
bonnie.lair last edited by
My ROBO doesn't have a setting to print with PETG filament. Does anyone know what my settings should be to print? I've tried using the PLA settings, but it just doesn't look good.
PETG is going to work a lot like PLA in the aspect of it's looks but you will need to bump up the extrusion temp by 30c and the bed should stay about the same at 55c or so. So your extrusion temp should be about 245c to start and depending on the manufacturer you will need to adjust a bit more.
smithnovel last edited by
This post is deleted!
ssweat last edited by ssweat
@bonnie-lair old post i know but just adding my 2 cents in hopes it will help someone, I have used pla settings with only 2 changes to make it work well, Extruder temp 240 degrees Bed temp 75 degrees with a mist of hairspray works well for my PETG