Q: How to print over the wifi network? (mattercontrol+?+raspberry?)

Hairyloon

Sussed it. Printer is on ttyUSB0 not on ttyASM0

Still getting errors though:

Attempting to connect to: 192.168.1.14 on port 2323
Connected to: 192.168.1.14 on port 2323
->Communication State: AttemptingToConnect

->N1 M110 N1*125

->N1 M110 N1*125

<-echo:Unknown command: "Ã¿Ã»,Ã¿Ãº,"
->Communication State: Connected

->N1 M110 N1*125

<-ok
<-echo:Unknown command: "S0"
<-ok
->N1 M110 N1*125

<-echo:Unknown command: ""
<-ok
->N2 M114*37

<-ok
<-X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0
<-ok
->N1 M110 N1*125

<-ok
->N2 M115*36

<-FIRMWARE_NAME:Marlin SkyNet3D-V2.3.2 (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:SkyNet3D EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
<-ok
->N3 M114*36

<-X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0
<-ok
->N4 M104 T0 S0*37

<-ok
->N5 M105*34

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N6 M105*33

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N7 M105*32

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N8 M105*47

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N9 M105*46

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N10 M105*22

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N11 M105*23

<-ok T:16.2 /0.0 B:16.4 /0.0 @:0 B@:0
->N12 M105*20

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N13 M105*21

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N14 M105*18

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N15 M105*19

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N16 M105*16

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N17 M105*17

<-Error:No Line Number with checksum, Last Line: 16
<-echo:Unknown command: "0"
<-ok
->N18 M105*30

<-echo:Unknown command: ""
<-ok
->N19 M105*31

<-Error:Line Number is not Last Line Number+1, Last Line: 16
<-Resend: 17
<-ok
->N17 M105*17

<-Error:No Line Number with checksum, Last Line: 16
<-echo:Unknown command: "0"
<-ok
->N18 M105*30

<-echo:Unknown command: ""
<-ok
->N19 M105*31

<-Error:Line Number is not Last Line Number+1, Last Line: 16
<-Resend: 17
<-ok
->N17 M105*17

->N17 M105*17

<-echo:Unknown command: ""
<-ok
->N18 M105*30

->N18 M105*30

<-echo:Unknown command: ""
<-ok
->N19 M105*31

<-Error:Line Number is not Last Line Number+1, Last Line: 16
<-Resend: 17
<-ok
->N17 M105*17

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N18 M105*30

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N19 M105*31

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N20 M105*21

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N21 M105*20

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N22 M105*23

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N23 M105*22

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N24 M105*17

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N25 M105*16

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N26 M105*19

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N27 M105*18

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N28 M105*29

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N29 M105*28

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N30 M105*20

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N31 M105*21

<-ok T:16.2 /0.0 B:16.4 /0.0 @:0 B@:0
->N32 M105*22

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N33 M105*23