custom fan code not running
jnl1105 last edited by
I have a couple of fans i run to help with pal and if run on the matter controller it will not turn on the fans, the code I am running on matter controller is under the start g-code settings M107 S255 it does shut them off with the M107. Sometimes when i go into the manual control after it has started it will be at 35% which is not enough to spin my fans. I need them to start at 100%. Any ideas?
here is my settings file:https://www.dropbox.com/s/bgjkv7q57s3bbkx/default_...
unlimitedbacon last edited by
Its called the MatterControl Touch, not the Matter Controller (although we do seem to get that a lot for some reason -_-).
M106in your start gcode is being overriden by your settings in Settings Filament Cooling. Specifically, you have disable fan for the first layer turned on and your minimum fan speed is set to 35%. Change those and the fan will run all the time.
jnl1105 last edited by jnl1105
thank you I was already playing with those settings toda