does anyone know how to fix this



  • 0_1531147010373_IMG_E1375.JPG 0_1531147023379_3d printes settings.PNG



  • that sir, is Under extruding. increase your extruding multiplier. usualy begins at 1 increase by .05 or .1 till its corrected.



  • I know it has been awhile, but if you calibrate your extruder output, you will not have to putz with the extrusion multiplier. Plus, your model is quite under-extruded so you you may still be trying to find the right multiplier. Calibrate your extruder and then you can "fine tune" while printing. Also, make sure you have the nozzle diameter set to match the nozzle installed on your printer. Hope this helps if not too late.


Log in to reply
 

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.