GCode issue ?



  • Hi, See small section of the log file below FYI (from the Terminal window) in MatterControl 1.7.2).

    My printer is a Vector 3 so I have created a profile from the "Other" options.

    All was working fine, but now it seems to get stuck once the bed gets to temp. The extruder heats up but the temperature does not change on the screen and therefore the print won't start as it doesn't see the extruder get to the correct temp.

    Any ideas ?


    ->N40 M105*19 [35.813]

    <-ok T:112 B:59 [35.828]

    ->N41 M105*18 [36.835]

    <-ok T:112 B:59 [36.852]

    ->N42 M105*17 [37.857]

    <-ok T:112 B:59 [37.876]

    ->N43 M105*16 [38.882]

    <-ok T:111 B:59 [38.900]

    ->N44 M104 T0 S190*25 [38.965]

    <-ok [38.980]

    ->N45 T0*11 [38.980]

    <-Unknown command: [38.996]

    <-N45 T0*11 [38.996]

    <-ok [38.996]

    ->N46 M114*21 [38.996]

    <-X:0.00Y:0.00Z:0.00E:0.00 [39.012]

    <-ok [39.012]

    ->N47 G28*32 [39.042]

    ->N47 G28*32 [49.043]

    ->N47 G28*32 [59.043]

    <-ok [64.849]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:47 [64.849]

    <-Resend:48 [64.849]

    <-ok [64.849]

    ->N1 M105*38 [64.879]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:47 [64.902]

    <-Resend:48 [64.902]

    <-ok [64.902]

    ->N1 M114*38 [64.902]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:47 [64.925]

    <-Resend:48 [64.925]

    <-ok [64.925]

    ->N1 M110 N1*125 [64.925]

    <-ok [64.941]

    ->N1 M110 N1*125 [64.941]

    <-ok [64.957]

    ->N1 M110 N1*125 [64.957]

    <-ok [64.973]

    ->N2 G1 X-0.01 Y-0.03 Z3.806 F5000*19 [64.973]

    <-ok [64.989]

    ->N3 M104 T0 S190*42 [65.019]

    ->N3 M104 T0 S190*42 [75.019]

    ->N3 M104 T0 S190*42 [85.019]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [85.693]

    <-Resend:4 [85.693]

    <-ok [85.693]

    <-ok [85.693]

    ->N1 M105*38 [85.693]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [85.716]

    <- [85.716]

    <-Resend:4 [85.716]

    <-ok [85.716]

    ->N1 M105*38 [86.722]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [86.745]

    <-Resend:4 [86.745]

    <-ok [86.745]

    ->N1 M105*38 [87.752]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [87.775]

    <-Resend:4 [87.775]

    <-ok [87.775]

    ->N1 M105*38 [88.807]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [88.830]

    <-Resend:4 [88.830]

    <-ok [88.830]

    ->N1 M105*38 [89.835]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [89.859]

    <-Resend:4 [89.859]

    <-ok [89.859]

    ->N1 M105*38 [90.864]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [90.899]

    <-Resend:4 [90.899]

    <-ok [90.899]

    ->N1 M105*38 [91.905]

    <-Serial Error: Line Number is not Last Line Number+1, Last Line:3 [91.928]

    <-Resend:4 [91.928]

    <-ok [91.928]



  • This line:

    ->N45 T0*11 [38.980]

    seems to indicate that MatterControl is sending something that is not a command. I'd like to investigate further, but will need more information. Can you please send the Model File, Slice Settings, and G-Code File as outlined in this article? http://wiki.mattercontrol.com/Send_Debugging_Information#Other_Useful_Files

    Please use Dropbox or Google Drive to share the files, then post the share link here.


Log in to reply
 

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.