I need help...



  • Let me start by saying I'm really new to #DP and this forum...

    I received a large 3D Printer Rotechtyphoon V2 / 550x325x440 Duel head and extruder

    Here's what I know:

    • Both hot-ends Heat and fans attached also run and keep the heatsink cool
    • both extruders run both feed and extract
    • X, Y, and Z all run and given a print path will follow the path.
    • Cable management is all in great shape and no fraying of any cables
    • Heated bed and compartment all work and get to temp fast (it's fully enclosed)
    • runs raspberry Pi (octopi) and utilizes a smoothie board and as I said earlier X, Y, Z all function as desired
    • I can log in with Octoprint and control, heat, and cool all the components.

    I assume at this point the nozzles are clogged and/or need to be cleaned out or replaced... The filament in the tube won't extrude and when I open the extruder to manually feed, it won't feed... (heated to 250degrees)

    How do I do that?

    Everything I see looks like it has a removable nozzle and is different than my hotend.

    Do I need to replace my hot end and nozzle and are they universal?

    front view of printer head
    spare end that came with 3DP


  • Global Moderator

    @zadstyx You should post this under other printer support instead of the Pulse 3D forum


Log in to reply
 

Looks like your connection to MatterHackers Community was lost, please wait while we try to reconnect.