2 T10 problems.
these two problems have just occurred.
1) i am getting a box come up at the start telling me turn on location, how can I get rid of it.
2) this is the most annoying, suddenly the small USB connection is playing up. I normally use this to upload models, .
when it does upload one it disconnects, and will not reconnect, until I remove the usb addapter..then all works fine.
Never had these problems before.
1) MatterControl doesn't require any location services, so if you're getting this prompt, then either a) a different app is requesting this, or b) there is an issue with the Android OS. If you're sure you don't have any other apps installed that would be asking for this information, then you might try the factory reset. Email email@example.com for instructions.
2) You could try a different USB computer connection mode. Swipe down from the top right of the screen twice to show the context menu, then choose SETTINGS. Navigate to Storage > overflow menu (three vertical dots at the top right of the screen) > USB computer connection and switch from MTP to PTP. Reconnect the tablet to the computer and try the transfer. If you still have issues, let's try a factory reset.
funny the first item cured itself without any help from me, the second is still,
I am using an SD card at present, but the memory stick was more convenient.
Did you try changing the computer connection mode as I suggested? Or are you using the USB port to plug in a USB stick? I assumed you were connecting it to a computer.
Its the USB stick that I have my STL files, and have been loading them from that, that is the problem I am having.
But did you try changing the computer connection mode as I suggested?