FREE, FAST SHIPPING IN THE U.S.
CUSTOMER SERVICE +1 (949) 613-5838

Get $15 MatterHackers Store Credit for Printer Profiles!


  • Hi MatterControl users!

    The MatterControl team is gearing up for the next version, and we're hoping to add some new profiles to the mix. If you have a printer not currently supported in MatterControl and have developed a profile for it, you can send it to us in exchange for a $15 store credit for the MatterHackers online store.

    RULES:

    1. The profile must be your own original work that you've done to get your printer going with MatterControl. We will not accept ported profiles from Cura, RepHost, etc. (that's too easy and we can do it-- we're looking for genuine work).
    2. The profile must be for the stock version of the printer, not modified in any way. Your own printer can be modded, but the profile must not reflect these changes and must be able to work for the stock version with little to no additional work.
    3. The files for the profile must be named and organized in a folder like existing profiles (see the link below).
    4. There is a limit of three (3) $15 credits per user account*.


    Format the profile according to the instructions in this article: MatterControl Wiki: Custom Printer Profiles

    When you're ready, email the whole profile in .printer format to support@matterhackers.com. We'll check it out, and if it fits all the criteria we're looking for we'll reply with a coupon code good for $15 of merch in our store.

    Here's the current list of printers for which we'd like to have a profile:

    • Creatbot DM02
    • Wanhao Duplicator 2
    • Ultimaker Original
    • Hyvision Cubicon
    • MendelMax 3
    • GermanRepRap NEO
    • Dremel IdeaBuilder
    • Zmorph
    • 3D Stuffmaker Mega Prusa
    • Printrbot Play
    • BQ Witbox
    • MakerFarm Pegasus 8” & 10"
    • Creatbot
    • 3DKreator
    • QU-BD 1up, 2up, and 3up
    • invent-a-part's Rigidbot
    • Architect Monoprice
    • Felix 3.0
    • Velleman Vertex K8400
    • 3DP1000
    • Dream Maker Overlord and Overlord Pro
    • Fabrikator mini 1.5
    • Monoprice Maker Select
    • Makerfront
    • Makerfarm Prusa
    • QU-BD Revolution XL
    • Einstart S
    • RepRap Wilson II
    • Rostock mini G2s Pro by Geeetech
    • Mankati Fullscale XT Plus
    • Boxzy
    • Geeetech New Kossel Delta Rostock Mini G2s
    • E3D BigBox
    • Micromake D1
    • Replikat M5 Extended
    • Tevo Tarantula
    • Wanhao Duplicator 6
    • Wanhao Duplicator i3 Plus
    • Zinter Pro
    • Monoprice Maker Select Mini
    • RigidBot DX
    • Mass Portal Pharaoh series
    • Raise3D N-series
    • Renkforce 1000
    • 3D Design & Make
    • Monoprice Dual
    • HICTOP Prusa i3
    • If your printer isn't on the list but still isn't supported by MatterControl and you have a profile, feel free to send it anyway-- we'll still honor the giveaway terms.

    *Unless you're incredibly savvy and have more than three printers that you've generated profiles for. In that case, we'd very much like to talk to you anyway so email us and we can make an exception.


  • profiles 2 mattercontrol 22
    3
    Posts
    1169
    Views
    Log in to reply


  • Any credit for fixing major issues with current profiles?

    Is there an appropriate place to report problems?



  • @natewin We'll honor the $15 credit for submission of a profile that fixes a major issue, but we will decide what is a major issue and what isn't. Basically, we're looking to reward significant effort, so as long as your profile is vastly improved over the current iteration we would consider it a new profile and issue the $15 credit.


profiles 2 mattercontrol 22
3
Posts
1169
Views
Log in to reply