MatterControl is not able to connect to machines over Wifi, it will need to be hardwired.

Still would like some overarching monitor feature that would show all printer status on one page.

Sussed it. Printer is on ttyUSB0 not on ttyASM0

Still getting errors though:

Attempting to connect to: 192.168.1.14 on port 2323
Connected to: 192.168.1.14 on port 2323
->Communication State: AttemptingToConnect

->N1 M110 N1*125

->N1 M110 N1*125

<-echo:Unknown command: "ÿû,ÿú,
"
->Communication State: Connected

->N1 M110 N1*125

<-ok
<-echo:Unknown command: "S0"
<-ok
->N1 M110 N1*125

<-echo:Unknown command: ""
<-ok
->N2 M114*37

<-ok
<-X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0
<-ok
->N1 M110 N1*125

<-ok
->N2 M115*36

<-FIRMWARE_NAME:Marlin SkyNet3D-V2.3.2 (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:SkyNet3D EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
<-ok
->N3 M114*36

<-X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0
<-ok
->N4 M104 T0 S0*37

<-ok
->N5 M105*34

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N6 M105*33

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N7 M105*32

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N8 M105*47

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N9 M105*46

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N10 M105*22

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N11 M105*23

<-ok T:16.2 /0.0 B:16.4 /0.0 @:0 B@:0
->N12 M105*20

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N13 M105*21

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N14 M105*18

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N15 M105*19

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N16 M105*16

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N17 M105*17

<-Error:No Line Number with checksum, Last Line: 16
<-echo:Unknown command: "0"
<-ok
->N18 M105*30

<-echo:Unknown command: ""
<-ok
->N19 M105*31

<-Error:Line Number is not Last Line Number+1, Last Line: 16
<-Resend: 17
<-ok
->N17 M105*17

<-Error:No Line Number with checksum, Last Line: 16
<-echo:Unknown command: "0"
<-ok
->N18 M105*30

<-echo:Unknown command: ""
<-ok
->N19 M105*31

<-Error:Line Number is not Last Line Number+1, Last Line: 16
<-Resend: 17
<-ok
->N17 M105*17

->N17 M105*17

<-echo:Unknown command: ""
<-ok
->N18 M105*30

->N18 M105*30

<-echo:Unknown command: ""
<-ok
->N19 M105*31

<-Error:Line Number is not Last Line Number+1, Last Line: 16
<-Resend: 17
<-ok
->N17 M105*17

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N18 M105*30

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N19 M105*31

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N20 M105*21

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N21 M105*20

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N22 M105*23

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N23 M105*22

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N24 M105*17

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N25 M105*16

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N26 M105*19

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N27 M105*18

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N28 M105*29

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N29 M105*28

<-ok T:16.3 /0.0 B:16.4 /0.0 @:0 B@:0
->N30 M105*20

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N31 M105*21

<-ok T:16.2 /0.0 B:16.4 /0.0 @:0 B@:0
->N32 M105*22

<-ok T:16.4 /0.0 B:16.4 /0.0 @:0 B@:0
->N33 M105*23